netdiag is a powerful, network-testing utility that performs a variety of network diagnostic tests that can help you to pinpoint a networking problem. The output listing below shows the output from a typical execution of the Netdiag command. You can scan this listing to see the types of tests that the netdiag command performs.
Refer below link for dcdiag swiches: -us/library/cc773199(WS.10).aspx Note:Netdiag.exe tool has been deprecated in Vista and Windows Server 2008. It's not supported. However if you want to execute netdiag copy Netdiag.exe file from Windows server 2003 to server 2008 and give a shot it should work fine -server-2008/where-is-netdiag-for-win-server-2008/Hope this helps
The netdiag utility performs a variety of networkconnectivity tests, including a DNS test. The netdiag/test:DNS command iterates over each active networkadapter and checks whether the hostname has an A record in the domainspecified by the domain suffix for the adapter. If you receive anerror message for the DNS test, you should runnetdiag /test:DNS /debug, which will produce verbose output andhelp pinpoint the cause of the failure.
If you run netdiag /test:DNS on a domain controller and receiveerrors, you can run it again with the /fixoption to force all the records in thenetlogon.dns file to be refreshed in DNS. SeeChapter 8 for more details on thenetlogon.dns file.
Of all the commands that are part of netdiag package, netload is simplest to use & understand as it provides only a simple report on current network traffic from the system. It also shows the total amount of data transferred since its start.
I first tried to install the update for XP from this site but when I tried to execute it I got a message box that basically stated that this utility was already installed with my Service Pack. (I have XP SP3).
The closest thing I found in my web searching was this blog post which talks about netdiag /fix. But apparently the netdiag utility no longer exists and the post implies that it would only re-register things that are missing. I've also tried various combinations of dcdiag /fix with no luck.
You are correct, ipconfig /registerdns only registers the main A and PTR records for a server; netdiag is obsolete and dcdiag only tests whether the proper DNS records are correctly registered, it doesn't actually fix them if they are not.
Active Directory relies on a correctly configured DNS infrastructure. DNS issues can be checked using the DNSLint tool. DNSLint is a command line utility for troubleshooting common DNS problems ( ). There are three arguments that allow us to verify the DNS is working correctly.
"[Fatal] Failed to Get System Information" Error Message Occurs When You Run Netdiag "The procedure entry point DnsGetMaxNumberOfAddressToRegister could not belocated in the dynamiclink library DNSAPI.dll." error when running netdiag on XP What does netdiag /fix do
Make sure you are running the version form XP CD. There is a possibility that you have a W2K version of netdiag installed explicitly - there was a download from KB. Or you may just upgrade the OS from w2k to XP. To fix this problem, you may want to re-install it. To re-install, run XP CD at \Support\Tools\SUPTOOLS.MSI and select "Remove all". After it is done, launch it again to install appropriate version of support tools. What does netdiag /fix do
The Netdiag tool will return the test results for several network components, including the Winsock. For more details about the test, use /v at the end of the netdiag command: netdiag /test:winsock /v
With a IPSec/L2TP connection , you can use the Ipsecmon utility to view the policies that are in effect. For example, you may see items similar to the following sample output for a default L2TP/IPSec connection (client-to-server or server-to-server):
Although netdiag.exe can still be used to obtain information about networking,Windows Server 2003 no longer uses the netdiag /test:ipsec option; it has been removed and replaced with the netsh commands for IPSec. All IPSec-specific functionality is present in the netsh utility.You can view information about IPSec policies using either the netsh ipsec static show command or the netsh ipsec dynamic show command.
Users without administrator rights cannot access current policy information. This prevents users from potentially gaining access to information without consent. The netsh utility will inform the user that the IPSec policy is in effect, or if they were unable to get the policy. You can view information about IPSec policies using either the netsh ipsec static show command or the netsh ipsec dynamic show command.
The ping command is a networking utility used to test the reachability of a host on an Internet Protocol (IP) network. It can be used to determine whether a specific IP address is accessible, and also measures the round-trip time for messages sent from the localhost to a remote host. In addition, Ping can provide information about the network routes and the amount of time required to traverse them.
NetStat is a networking utility that can be used to display all active network connections and their status. It can be used to identify which applications are using which ports and can be helpful in troubleshooting networking issues.
NbtStat is a networking utility in Windows that helps users troubleshoot NetBIOS over TCP/IP problems. It can be used to display a variety of information about the current state of the NetBIOS over TCP/IP protocol on both local and remote computers.
NetDiag is a networking diagnostic tool that is included with the Windows operating system. This command-line utility can be used to troubleshoot various networking issues, such as connectivity problems or DNS resolution issues.
The DCDiag tool can be used to diagnose the health of Active Directory domain controllers, DNS servers, AD replication, and other ADDS infrastructure services. This utility is built into the modern Windows Server 2019/2016/2012R2 versions (in previous versions of Windows Server, the DCDiag utility must be installed manually from the Support Tools package). If you want to run DCDiag on client OS versions (Windows 11/10/8.1), you need to install the Remote System Administration Tool (RSAT) pack on your computer.
With this utility, you can perform up to 30 different tests of your Active Directory Domain Controller to check its health status and other major issues that could be happening without you even knowing!
2.The command line utility gpresult.exe can be used to verify that the Group Policy was received and applied properly by the client computer (this utility should be run locally on the client computer).It is imperative to make sure that the GPO is applied to the appropriate OU and Domain.Gpresult is built in Windows XP
After running this tool in a command window with the /v option this utility will output all the Group Policy objects that were applied to the local system.The output will be divided to user settings and computer settings.Verify that all the Group Policy objects configured in the active directory are properly applied to the local system.
3.The command line utility gpotool.exe can be used to verify that all the group policy objects stored in the active directory are valid and contain all the information needed to apply the group policy locally. (This utility should be run locally on the client computer)
If you cannot find a certain group policy in the gpresult's output but you can find it in the gpotool, this might occur due to late replication schedule. Two more utilities that can be used to diagnose a misconfiguration in the network or the domain are netdiag.exe and dcdiag.exe:
4.The Command line Utility netdiag.exe is used to test the network status and indicate problems with the connectivity of your client.This utility is included in the support tools package which is located on the install CD under supporttools,it can also be downloaded from: =1EA70814-7E6C-46E5-8C8C-3C439A732E9F&displaylang=enUse this utitlity by typing netdiag in the command line prompt and inspecting the results to make sure there are no connectivity issues.
5.The command line utility dcdiag.exe is used to verify that the domain controller is configured properly and fully functional, this tool runs numerous tests on the domain controller and any errors received need to be fixed and verified.A poorly configured domain, or a malfunctioning domain controller can prevent the computers from receiving a valid Group Policy.(This utility could be run locally on the client computer or on the domain controller).
The DCDiag is built into the modern Windows Server versions, including 2012R2, 2016, and 2019. For older versions, you would need to manually install it using the Support Tools package. The utility is available as long as you are running AD DS (Active Directory Domain Services), or AD LDS (Active Directory Lightweight Directory Services). If you want to run the DCDiag from a Windows OS client, you would need to install the RSAT roles on the computer.
The DCDiag is an easy-to-use and simple, yet powerful utility for checking the health of your domain controllers. DCDiag can help you troubleshoot DNS issues, AD replication, and other domain service problems.
Slurm is another command-line utility used to monitor the network load by showing the device statistics and ASCII graph. The slurm tool generates three types of graphs that you can manage using c (classic mode), s (split graph mode), and l (large) options.
The netload is a command-line utility that displays the information about the current traffic load and the number of total bytes transferred during the process. To get the netload utility on Ubuntu / Debian distributions, run the following command: 2b1af7f3a8