If you're looking for the drivers necessary so that once you've installed Windows you don't have any sort of problems with any of your Mac's components, download Boot Camp Support Software right now.
Update (2016-07-20): I have updated this post with further improvementsrelating to downloading of Boot Camp drivers and ensuring that a Hybrid MBR isnot used (which would cause issues when installing Windows).
Upon installing the Trackpad++ driver and Control Module, your computer will need to be restarted and will do so automatically at the end of the installation. It is recommended to close the running programs, pause downloads, etc., before you start the installation procedure.
Q.: Is there a proven working method of installing Windows 11 on an Intel-based Macbook, Macbook Pro, or Air? A.: Here is the method that worked for us (valid as of October 2021 for any Windows 10 compatible Macbook).1. Download 64-bit Windows 10 ISO image from Microsoft (Link: -gb/software-download/windows10)2. In macOS Use "Boot Camp Assistant" app and feed it with downloaded ISO image in order to initialize and install the Boot Camp environment normally.3. When Windows 10 is up and running, go to AveYo MCT GitHub and from there download / unzip the zip archive (you might need to click the "Code" button on that page in order to see the zip download option).4. From the folder where you unpacked that zip, run "MCT/Skip_TPM_Check_on_Dynamic_Update_v2.cmd".5. From the same folder, run "MediaCreationTool.bat" (a window titled "MCT Version" should appear).There choose "11". Another window will appear, there choose "Auto Setup", this will download Windows 11 21H2 and install it for you.
Now that we have the USB drive fully prepared, there is one more step to go through before we can do the installation. That is to partition your hard drive or SSD in order to have a place to install Windows 11. For this post, I will go for a dual boot where I will have Windows 11 and macOS next to each other on the same disk.
After the reboot, most devices and at least your device to connect to the network should be working again. From here, we will launch Windows Update and make sure we have the latest updates and potential remaining missing drivers:
After going through all the steps above, your Mac will boot by default in Windows 11. In order to switch back to macOS (temporarily), you can reboot and hold down the Alt key. Exactly the same as you did to boot from the USB drive when installing Windows 11.
Great tutorial.Installed W11 on my MacBook Pro mid 2012.However brigadier comes with message that Windows 7 should be installed and does not install bootcamp.It is a Windows11 only install so no OSX on a partition.Sound card does not work.Any tip or so how to fix?
Bootcamp (Boot Camp Assistant) is essentially Apple's way of welcoming Microsoft into its walled garden in a roundabout way. In other words, it allows you to install Windows on a Mac computer by partitioning the disk and letting you dual-boot a laptop or desktop. You will need to specify the amount of disk space for Windows installation, as well as get all the drivers required to run Windows on your Mac OS X or macOS computer. Once installed, it will be exactly the same as working in Windows. A lot of users prefer this over switching between Mac and PC, so you can imagine why Boot Camp Assistant has been so popular for so many years.
That being said, there are a lot of problems in using Bootcamp Assistant on latest macOS such as Mojave or High Serria. One of the errors is the "Boot Camp installation failed" error. Apple suggests that you move to macOS Mojave and try installing Windows 10 again, but the issue doesn't always go away. Another common error is when trying to copy the Windows installation files. In still other cases, you'll notice that several Mac features don't work when running Windows, such as Apple Software Update stopping, no audio from built-in speakers, mic or webcam not recognized by Windows and so on.
Boot Camp Assistant is the official recommendation for creating bootable Windows USB. In case it does not work, we will suggest two alternative software in this section. Both are working fine on latest macOS and we tested three USB drives without running into any issue.
UUByte ISO Editor can work as a great alternative to Bootcamp for installing Windows OS on Mac. You can easily fetch all the required drivers using Bootcamp, but the installation process for putting Windows on your Mac is different from how Bootcamp does it. UUbyte is one of the most robust Windows 10 bootable USB creator for Mac that you'll ever find. It can do a lot more than just create bootable media, such as creating ISO files, editing them, copying from disc to ISO and so on. For this process, you will need to use the Burn module, which is explained below:
Step 3: Open the UUbytes program and click on the module that says Burn. Insert a USB flash drive and burn ISO to USB drive. Select the ISO image and click on Burn. This will create a bootable USB drive for the Windows installation.
This method uses Terminal application to create the bootable media for Windows 10. You will still need Boot Camp Assistant for the support software, but if you're comfortable with command line work, you try this approach. You will first need to download the Windows 10 ISO file. You will also need to use Boot Camp Assistant to get the support files, for which you can follow Step 3 from Method 1.
Step 3: You will be able to see a mounted disk called Windows 10. Mount the downloaded Windows 10 ISO file by double-clicking it in Finder. The name will be CCCOMA_X64FRE_EN-US_DV9. You can also run the following command:
Step 4: Unfortunately, there's no progress bar to indicate that the bootable media is being created. However, after a sufficient amount of time has passed, the USB drive will contain bootable media for a Windows 10 installation.
Mac will boot from internal hard drive or SSD in default. To install Windows OS on Mac without Boot Camp, you should let your Mac booting from USB drive to start the installation process. However, this is an easy task.
Make sure you disconnect all USB devices except a wired keyboard and the USB drive containing the Windows ISO files. Now restart your computer and hold down the Option (Alt) key at the same time. Wait for about 10 seconds, Apple logo shows up and you will be presented with several boot options. Pick up the drive you have set in Part 2. If you did not do that, the default name is EFI Boot.
When Mac boots from the bootable Windows 10 USB, wait about 30 seconds and Windows installation wizard appears. At this time, the window is much small because graphics driver are not installed yet. Now, you have to follow the screen prompt to choose language, region and most importantly the partition to install Windows OS files.
The Windows ISO image file only has the basic drivers for running Windows OS. Some of the hardware on Mac won't work in Windows, suchas Apple Mouse, trackpad or speaker. You have to install addition drivers to use Windows seamlessly as it is on a PC. To do this, you should download and install Windows Support Software with the help of Boot Camp Assistant.
As usual, launch Boot Camp Assistant app on your Mac and click Action tab on menu bar, where you can see an option named Download Windows Support Software. Now, choose your Windows Installer USB as the target location to store the driver files. It will take 5-10 minutes for the downloading task.
Now, boot your Mac into Windows partition. You will see a pop-up from Boot Camp installer. Just follow the prompt to install Windows Support Software. If it does not appear, then plug the USB drive and navigate to USB drive in File Explorer; then go to WindowsSupport -> BootCamp, and click setup.exe to start installing Windows drivers for this Mac.
If you are in macOS now and want to restart into Windows, then reboot your Mac and hold Option key untill you see the Startup Manager, where you can choose a booting device like we mentioned in Part 4, something like this:
If you are in Windows OS and want to switch to Mac, click the Up Carat icon and select Restart in macOS. If this option does not show up, then reboot Windows as normal and press Option key to bring up Startup Manager and pick up Macintosh HD this time.
It is absolutely not an easy journey for installing Windows on Mac without BootCamp. Fortunately, we have put everything together to help you complete this task smoothly. The key part is how to partition the Mac internal drive and create bootable Windows USB. If you are not comfortable using Terminal, UUByte ISO Editor is the recommended way to install Windows on a Mac without Boot Camp Assistant. It's reliable, quick and doesn't require any special technical knowledge.
Step 1: Double-click the VMware Fusion.dmg that you downloaded earlier and double-click the VMware Fusion installer that appears. Click Open, followed by entering your Administrator password to start the install process.
EFI - Short for Extensible Firmware Interface, a specification designed by Intel to replace BIOS as the method to interface between an operating system and the platform firmware. This former isn't essential to understand beyond that it is a computer's firmware. Apple adopted EFI on Intel Macs, and this is the interface that allows selecting a boot drive before OS X begins booting (by holding down the option), among other pre-OS loading functionality. I use the term EFI slightly loosely as I'll refer to the boot screen as the EFI even though it isn't all that EFI provides for the Mac. It is also important to understand that the UEFI (Universal Extensible Firmware Interface), which is now industry standard for PCs, isn't the same as Apple's EFI on computers from 2013 before. They are similar, but Apple's implementation varies partly due to age (predating UEFI by a few years) and partly due to the closed nature of Mac OS. Apple has since begun adopting (at least portions of it) UEFI, so the implications are better for the 2019 Mac Pro and GPUs. In order for a GPU to display a pre-boot screen, need Universal Graphics Adapter Protocol (UGA) support on the GPU for the Mac Pro 1,1/5,1s. The more modern UEFI replaced UGA with Graphics Output Protocol (GOP), which is not used on the classic Mac Pros. Most aftermarket cards only support GOP and not UGA. This means without using OpenCore. Aftermarket GPU upgrades will not output video before the drivers are loaded. The lack of UEFI also has implications for other OSes like Windows, where MBR (Master Boot Record) needs to be used instead of UEFI if you are not using OpenCore. 2b1af7f3a8